May 11, 2015 | DIY
Sometimes you’re feeling a little ladylike…and a little edgy at the same time. This pearl and chain choker pairs so well with both demure outfits and darker streetwear easily. All you need is aluminum chain, glass beads, jumprings, and a closure. And of course some hematite spike beads for that necessary wild child. Here’s how to make your own with some affordable supplies from PandaHall: (and a brush up on How to Use Crimp Beads, below)
aluminum twisted curb chain (5 mm wide) // silver color aluminum twisted curb chain (5 mm wide) // 6mm white glass imitation pearl beads // non-magnetic hematite rectangle beads / matching jumprings (6 medium, can all be the same size) // 2 crimp beads // 2 (two) 3-strand necklace ends // Beadalon nylon stringing cord // chain cutting pliers // crimp pliers // jump ring tool (or another set of pliers)
1. Attach one end of the chain to one of the necklace ends with a jumpring.
2. Hold the flat curb chain against your neck and decide how long you want it (mine was 14″). Use the chain cutting pliers to cut it at that point.
3. Attach that end to the other necklace end, being careful to keep the chain flat.
4. Attach the next oval link chain in the same way, making a little longer than the first so it will drape lower and lay flat.
How to Finish a Necklace Using Crimp Beads
5. Crimp beads are an easy, clean way to finish a cord necklace, and they look really great. Thread one crimp bead onto the end of your Beadalon cord, leaving about 1″.
6. Thread a jumpring onto the end.
7. Curve the cord around the jumpring and back into the crimp bead. Make sure the loop around the jump ring is small.
8. Use crimping pliers to first smash the crimp bead flat (in the grooves closest to the plier center), then bend the flattened ends towards each other (in the hole closest to the plier tips). You’ll make the crimp bead into a flattened hot dog shape.
9. Attach the jumpring onto the final loop of the necklace clasp, below the chains.
10. Estimate how long you need and cut the wire a little longer than the length of the longest chain.
11. Start threadiing pearls onto the wire. Use the first pearl/s to hide the end of the wire.
12. When you are close to where the center of the wire would be, start adding hematite spike beads.
13. Add a spike bead, a pearl, and another spike bead in a graduated manner.
14. Continue adding pearls once the center spikes are finished. Once your strand of pearls is as long as you want it (slightly longer than the bottom chain so it hangs below it), add a crimp bead.
15. Be careful to hold the crimp bead close to the last pearl, and finish the end of the wire as before. Tuck the long end into the last pearl bead/s.
16. Use a jumpring to attach to the remaining open loop in the necklace closure.
And that’s it!
It’s a little fiddly and something you’ll want to do while watching your fave TV show to pass the time…but once done this 3-strand sophisticated choker has maximum impact.
You can make your own just by checking out PandaHall.com for the best beading supplies!
FTC Disclosure: Pandall.com provided me with the craft supplies featured in this post for me to make a fun DIY with. I have received no other compensation. The opinions above are my own. For my full Disclosure Policy, click here.
Sep 18, 2014 | DIY
This DIY tutorial has likely been done already hundreds of times in the aftermath of Tom Binns releasing his neon cameo collection in Spring 2012 – but what’s once more? I love the juxtaposition of elegant, old-world cameos harkening back to the times of daguerrotypes and intaglio portraits…rendered in full-on neon for the modern age. You can make your own easily, with some paint, rhinestone chain, and a soft embossing metal as backing – with no one the wiser as to how your unique creation came about. Here’s how:
1 cameo (and this place has the best selection!) / rhinestone cup chain / gold embossing metal / scissors / jump ring / pliers / wire-cutting pliers / jewelry glue (not pictured) / pin or awl (not pictured) / paint in 2 neon colors / primer or white paint / pen / paintbrush / matte sealant (optional, not pictured)
How To: 1. Since cameo colors are usually fairly opaque, you may want to prime your cameo first with a coat of primer, or just a coat of white paint. Allow to dry.
2. Paint the cameo. Usually it’s easiest to paint the lighter color first, than the brighter or darker color next. You may have to do a couple coats of each color to fully hide the color of the original cameo.
3. (optional) Paint a coat of sealant on he cameo to hide brushstrokes and prevent paint chipping. Allow to dry.
4. Glue the cameo onto a small piece of embossing metal.
5. Place the rhinestone chain around the cameo, and cut to desired length.
6. Spread glue on the back of the rhinestone chain, and glue to the metal backing around the cameo.
7. When dry, poke a hole in the embossing metal with a pin or awl.
8. Trim the metal close around the chain, and use the side of the scissors to fold it to cup the chain so no sharp edges stick out.
9. Thread a jumping through the hole you made, onto a necklace.
And you’re done!
Wear with something dark and modern for contrast, or pair with a pastel frilly corset for your best Marie Antoinette impression!
Jul 3, 2014 | DIY
Tassels, tassels, everywhere! I officially declare 2014 the Year of the Tassel. They’ve been having a HUGE moment again, and I love their undone, boho-chic feel. Casual and cool at the same time. It’s very easy to make your own tassels – or even better yet, make your own fun colorblocked tassel NECKLACE (just like this $128 Anthro Fanned Botanique Necklace [no longer available]). Here’s how:
embroidery thread in 4 colors (I chose cobalt blue, navy blue, goldenrod, and metallic gold) / 3/8″ diameter natural rope, 1 yard long / 1 1/4″ goldtone D-ring / scissors / tape / glue / toothpick (optional)
How To: 1. Start wrapping the embroidery thread around the bottom of the D-ring, using 2 fingers to create the right length. Wrap around many times until you get a thick bundle.
2. Slide your fingers out from the bundle.
3. Snip a short piece of thread and tie around the bundle, close to the D-ring.
4. Wrap both ends of the thread multiple times around where you tied, and tie the ends together with a double knot. Leave the ends loose for now.
5. Use scissors to trim the bottom of the tassel flat.
6. Fluff out the threads in the bottom of the tassel.
7. Repeat Steps 1-6 for 2 more tassels in your first color. Repeat for 3 tassels in your second color. Repeat for 3 tassels in your third color. For the third tassel in that color, I made it using half metallic threads (since the metallic thread frays easily but isn’t as “fluffy” as the regular embroidery thread).
8. Use a dab of glue on each double knot you made in Step 4.
9. Snip off the ends of the threads close to those knots once dry.
10. Place the D-ring with the tassels in the center of your rope piece.
11. Use the metallic thread to wrap around each side of the straight part of the D-ring, many times, to secure the ring to the rope.
12. Finish each wrap by double-knotting the thread at the back. Dab with glue, and snip off the ends.
13. Try on the necklace and decide how long you want it. Use a piece of tape wrapped around the rope pieces to secure it to the length you like.
14. Cut off the excess rope.
15. Use a contrasting thread color to wrap around the rope ends and completely conceal them. End using a double knot, dab on glue, and cut the threads.
You’re done! A bright, bold accessory for breezy tops and easy dresses this season is only a couple wraps and snips away. You can you any combination of fun colors, and totally switch up the look of the piece by adding pompons, charms, or other accoutrements to make it all your own!
How will YOU wear your Colorful Tassel Necklace?
Dec 18, 2013 | DIY
Anthropologie, season after season, comes up with the most fabulous items in their stores – and so many of them look homemade and crafty: the perfect fodder for DIY. I noticed this beaded ladder tassel necklace during early Fall (part of Anthro’s Bijouterie necklace collection), and after clipping the photo and hunting for supplies, I finally sat down and made a DIY version. It was a bit fiddly, but incredibly rewarding to find the finished necklace looked just as amazing as the original in the catalog. (And at an $8 investment, pretty affordable too!) Here’s how to make your own:
You Need: (more…)
Aug 1, 2013 | DIY
I LOVE mixed-media accessories: they totally appeal to my bi-polar personality. 😉 Want a little rope? Sure, let’s start with that. And how about rhinestones? You can never have enough bling. And chain? Yup, got that. How about some ribbon, netting, embroidery thread, beads, and wire? OF COURSE!
I love that this piece is totally over-the top and such an eye-catching statement. (I wore it in this outfit here if you want to see how it stands out against other pieces.) It’s fairly simple to make since it’s really just a lot of gluing. Don’t be intimidated by the amount of materials…you can vary what you use for your own personal style statement! Here’s how: (more…)