So I spent the majority of the day today working on a tutorial for upcycling yet another men’s shirt into something way cuter for the girls! I can’t wait to take the photos of the finished product to share with all of you.
But that got me thinking…a reader asked me on formspring.me to share some tips for working with men’s shirts…and so I thought maybe I should share with all of you how I choose my shirts to re-work, and some techniques I use when sewing them.
First of all, I’m assuming that you are going to use a shirt that is not new or off-the-rack (right??). Using shirts that have been pre-worn for your re-fashions is one of the best ways to be eco-friendly, save something from being discarded and give it new life, and make a one-of-a-kind piece just for your very own. But it does pose some unique challenges.
*Choose a shirt that is NOT SEE-THROUGH.
Unless you’re planning on making a lining or always wearing your finished piece over something, you have to make sure that the shirt you choose is completely opaque, even when you’re standing in front of a light source. Many men’s shirts are made of “summerweight” cotton, which makes them very see-through if you’re not wearing an undershirt like a guy would be. TRY IT ON if you’re in a thrift store that has changing rooms; if not, place your hand inside the shirt. If you can see your hand, it’s a no-go.
*Do not use a shirt whose fabric is thinning, pilled, worn, frayed, or with stains/holes.
The more times the shirt has been through the washer/dryer, the thinner the fabric will be. If it’s visibly in bad condition, adding seams and making it into a dress it won’t help the situation. Do not choose something that is stained or has rips or holes in it unless the final design will cover those areas.
*In the same vein, do not choose a shirt whose seams are pulling.
Even if the shirt looks like it’s in good condition, pull at the side seams. If the fabric pulls away from the stitching and you can see obvious/large stitching holes down the seam, the fabric in that shirt cannot withstand seams that take stress. Stitching (even re-sewing) such fabric will result in visible holes, if not the fabric tearing completely away from the seam. DO NOT USE.
*Choose a shirt that is LARGER than you are.
This is a no-brainer. You need the extra fabric to work with and to make the details (and especially in case you make a mistake!). In most situations, I choose a shirt that’s as large as I can find.
The shirt in question (since it’s pre-worn) will also probably be pre-washed…if not, wash to remove the sizing using the hottest water recommended for the fabric, and dry it according to the directions.
*Use the same color thread as what was used to sew your shirt together in the first place.This is a little obvious. Bring the shirt with you to the sewing store and match the thread color visually.
*Use the same type of thread as what was used in the shirt.
I know it’s a hassle, but read the fiber content of the label and choose the thread accordingly to get the most professional results.
*Replicate the stitching in the shirt by practicing first.
Alot of my instructions for re-fashioning men’s shirts call for visible stitching, topstitching, hems, etc. To make sure the stitches you are adding to the shirt match those that are already there, practice on a piece of scrap fabric that’s similar in fiber content to the shirt. Adjust the thread tension and stitch length until your row of straight stitches looks exactly the same as the topstitching in the shirt. And don’t adjust your stitching beyond that – just leave your machine on that setting for the entire project.
And there you go! Hope that’s a bit of help – and just by following these simple rules on selecting and sewing shirts, you should have no problem creating a finished piece that rivals any ready-to-wear!