How to Make a Bohemian Macrame-Style Knotted Cord Elastic Belt
5 yd of satin cord (about 2.5 – 3 mm thick) *small amount of scrap fabric // 14 large crimp coil necklace ends (silver-tone) // 4 large silver-tone necklace end connectors // 1.5″ wide black elastic, cut to your waist circumference (we’ll be cutting it shorter below) // 2 snap fasteners
Tools You Need:
tape // scissors // wire-cutting pliers // sewing machine // regular to heavy-duty needle // thread matching belt color // snap-setting pliers or die & hammer // iron & ironing board
Prep Your Parts
1. Cut satin cord into the following pieces:
*FOUR pieces 14″ long (to make outer loop)
*FOUR pieces 18″ long (to make center knot)
2. Use pliers to press down the end coils of the crimp ends. Cut off the hang-loops of the end connectors.
3. Cut 4 pieces from your fabric, measuring 4.25″ wide by 3″ high. We’ll come back to those fabric pieces later.
Start Weaving: Outer Loop First
4. Thread 2 crimp ends onto a 14″ piece of cord. Loop it over and tape down the ends.
5. Tape down another 14″ piece of cord. Thread it through the crimp coil from the previous piece of cord…and add a crimp coil onto the cord.
6. Add another crimp coil, and loop it around.
7. Thread it back through the remaining crimp coil on the first cord. Tape down the end.
8. Secure the loop you just made with a piece of tape.
Keep Going: Inner Loop-and-Knot
9. Put a crimp coil on one of the 18″ cord pieces and tape down the end, placing it in the center and directly below the cord from the previous step.
10. Thread it through the crimp coil on the adjacent cord and loop it around to the right, then back under the first two cords, heading downwards.
11. Thread it over itself, then downwards under the first two cords again.
12. Loop it to the right, back over the first two cords, and then to the left under itself again.
13. Thread it back through the crimp coil on the adjacent cord.
14. Add another crimp coil, and tack down the end with tape.
15. Time for the final cord! Tape down the end of another 18″ piece of cord, and thread it to the right and through through crimp coil on the adjacent cord.
16. Add a crimp coil, and weave the cord around the center loop in the same manner as the previous piece. (It will be to the outside of the previous cord. Go under the previous piece, to the right, over the taped-down outer loop, up and around, under the outer loop cords, over the center loop cords and down…)
17. Keep following the center loop of the previous cord. (Around and to the right, over the taped-down center loop, back to the left, under itself…) And finally, thread it back into the crimp coil you added to it in Step 15).
18. Then tape its end down.
19. Shift the ends of all your cords together, re-tape, and push the crimp coils further to the right, closer to your center loop-and-knot.
20. Use pliers to add an end connector to the center cords just to the left of the taped-down loop. Smooth out your cords – and congratulate yourself on a job well done!
Other Side & Finish Lacing
21. Make one more group of looped cords in exactly the same manner. (See Steps 4) – 20)]
22. Place the two groups of cord side-by-side, matching up the centers. Add 2 more end connectors to the center loops to connect one side to the other. Now you’re finished with all that lacing – which probably feels fabulous!
Make the Belt
23. Tape both ends of the cord group on top of the ends of your piece of elastic. Make sure your cords are centered and each side overlaps the elastic the same amount.
24. Fold the elastic under itself, about 3/8″, and stitch the cords down on top. (I went over the same area twice with a straight stitch, then zigzagged down it for strength.) Stitch down both sides to the elastic.
25. Trim off the cord ends on the other side of your stitching.
26. Cut your elastic piece in half.
27. Place 2 fabric pieces right sides together, on top of where you’ve stitched the cords to the elastic. Trace the width of the elastic, and mark the width of the cords. Then draw a “D” shape between the elastic piece, about 2″ long.
28. Do the same for the other 2 pieces of fabric.
29. Sew around the “D” on each pair of fabric pieces, just outside you markings. Leave a small area unsewn on the flat side in order to turn them right-side-out.
30. Trim fabric around the sewing at about 1/4″.
Notch, then turn the pieces right side out. Tuck the unsewn areas’ raw edges to the inside. Press both pieces with an iron to flatten.
31. Place one D piece over where the cords are sewn to the elastic, in order to cover them. (Rounded edge of D needs to cover the cords but hang off the edge of the elastic.) Topstitch around edge of D, about 1/8″ from edge, to secure it to the elastic and the cords.
32. Try on belt, and center the knotted cord at your center front. Mark where the elastic meets at your center back. Cut elastic at that measurement.
33. Fold each end of elastic under about 3/4″. Sew down about 1/2″ from edge.
34. Set two sets of snaps in the elastic ends according to the instructions on your snap-setting pliers or die set.
Ta da! This tutorial looks complex, but doing it is incredibly rewarding – and the whole process is a lot faster than it looks!
Tip: If you want to make more of a statement piece, use thicker cord or rope, and thread it through large-hole beads instead of jewelry findings. You could even wrap strips of embossing metal around the cords instead of threading them through beads at all!
Have fun and go tribal:-)
It also doubles as a cute necklace at this size!
as originally posted on Threadbanger.com
that is suuper cool!!!
I’ve recently started a blog, the information you provide on this site has helped me tremendously. Thank you for all of your time & work.